Jolly Gel Flocculant is a concentrated gel-formula pool clarifier designed to quickly restore sparkling clarity to cloudy swimming pool water.
What It Does
Flocculants work differently from ordinary clarifiers. Instead of filtering out fine particles, Jolly Gel Flocculant binds suspended particles — including fine dirt, dead algae, sunscreen residue, and other organic matter — into larger clumps that sink rapidly to the pool floor. You then vacuum them to waste, removing the debris completely from the water rather than recirculating it through your filter.
The result is noticeably clearer water in as little as 24–48 hours, even in pools with heavy clouding.
How to Use
Ensure your pool pump and filtration system are running.
Check and adjust pH to the ideal range of 7.2–7.6 before treatment for best results.
Dilute the required dose of Jolly Gel Flocculant in a bucket of pool water.
With the pump running, distribute the solution evenly around the pool.
Run the pump for 1–2 hours to circulate the product, then switch the pump off and allow the pool to stand still for 24–48 hours so that the flocculated particles settle to the bottom.
Once settled, vacuum the debris directly to waste — do not recirculate through the filter.
Top up the pool water as needed after vacuuming.
Safety Notes
Keep out of reach of children and pets.
Avoid contact with eyes and skin. If contact occurs, rinse thoroughly with clean water.
Do not swim during treatment. Allow at least 24 hours after vacuuming before swimming, and check that water chemistry is within safe ranges.
Store in a cool, dry place away from direct sunlight and incompatible chemicals.
Always read the full product label before use.